Metallized and coated matte PET film Coated PET Film

Metallized and coated matte PET film Coated PET Film PET Release Liner Manufacturers

Coated Matte PET Film Specifications:
Thickness(micron) Width(mm) Core ID(inch)
19~50μm 500~2000 3”or 6”
The specifications can be adjusted according to the customers’ requirements.

Typical Values:
Property Unit Typical value Testing Method
Thickness mm 45 DIN 53370
Tensile Strength(MD/TD) MPa 170/201 ASTM D 882
Elongation at brea(MD/TD) % 170/102 ASTM D 882
Heat shrinkage(MD/TD)150℃,30min % 0.8/0.2 ASTM D 1204
Haze % 95.0 ASTM D 1003
Gloss(45°) % 30 ASTM D 2457

The above values of the properties obtained in our laboratory test. These values are for informative purpose and not in guarantee or warranty in any specific condition. Users are advised to conduct their own testing to determine product suitability to use.

Firsta Matt PET Film Main characteristics:
1. High haze, low light transmittance.
2. Low gloss on the surface.
3. The top-coating side of this product has superior printing ink adhesion for UV ink printing and bar code printing on labels, which will not fade away over time like the corona-treated side does.

Matt PET Film Application:
It is used as face stock of non-transparent self-adhesive label, such as electronic products.

تم النشر من قبل:

Hubei Firsta Material Science and Technology Group Co., Ltd

الصين

Founded in 1988, we were originally named as Yumeng Plastic Film Factory. We are consisted of Hubei Firsta Material Science and Technology Group Co., Ltd, Yunmeng Debang Industrial Co., Ltd, Hubei Tuxin Materials Technology Co., Ltd, Hubei Turui new material Technology Co. ...